V8-Ranger.com

You have to take the distributor out and take the gear out also, then it should come off. At least that's what i did when I had no ignition
check out
http://www.therangerstation.com/tech_li ... ostic.html

But I check the current on the output of the msd box where the coil gets power and i don't get nothing but on the mustang harness i get 12v now does that matter? Again i check the msd box and it works And from what i understand is that you are telling me that the module on the distributor is bad? an...

Hey guys I hope you guys help me again like last time. Well last time I didn't have pulsation on the injectors and someone here told me to check for grounds and that fix that problem until this... I finish all my harness relocation and i put it nice and neatly on the engine bay and it crank good for...

Sorry I took so long to answer, I haven't been on lately looks good your upgrading the rear right, when your done post some times Yeah I'm getting a ford 9 inch tomorrow with 4.11 gears, and sure when i'm done with it i'll post some times umm. . . . don't mean to be a pain (don't know if you know) b...

WOW I never thought that that steering wheel looked that good on a ranger good job

Looks and sounds great!!! You going to dyno it? How long are those upper and lower radiator flex hoses? Thanks! Actually i didn't measure the hoses I bought 2 18 inch hoses kit but I think that with a 12 inch kit is good but i'm not sure that why i bought the 18 inch kit Yep, that sure looks nice! ...

^^^Thanks

Very nice, post more pics and of course VIDS!!!!

autometer sells the guages and the gauge pod and yes you can get then in kph. go to summitracing.com

BTW you have to fabricate where the gauges go

all my dummylights and other gauges in my dash are not listed in my books. my books show the motor and body wireing but nothing for the gauge cluster anyone got ideas on what is what and where it should be wired? I hope this helps you http://therangerstation.com/tech_library/instrument_cluster_wire...

is you're truck lowered if so how much thanks I'm working on that right now lol. My truck is going to be lowered 5 1/2" rear 5" front. Kit is from belltech and i guess that's all you can find(That's what I was told from the company that i bought my kit from) but i wanted like 8 or 9 inch ...

^^^I don't have a pic right now but i have more than 1 inch clearance. Now i put like a half inch steel block on each side of the frame where the engine mounts go, i did that do to the fact that i'm using hooker's long headers and l&l product's solid engine mounts which their are not meant for e...

truck sounds pretty sweet man post some still pics of the motor and give some more detail on whats done to it cam heads etc thanks man Well I don't have pics of the motor itself right now but this is close. As for the motor.... 347 stroker crank - forged steel stroker pistons - probe srs forged rod...

This is my 93 Ranger with a 347 stroker. Excuse my wiring mess
http://videos.streetfire.net/video/0b72 ... fb8399.htm

Thanks!!!