V8-Ranger.com

get an msd pump thru jegs they will support approx 500 hp at 40 psi more at lower pressures, all of the areo motive regulators are boost referenced i think, the only difference between a referenced and a non referenced is that there is a nipple on the spring side (top) of the regulator that allows b...

looks good, just no discusions on politics,religion, and sex

use solid floats, rear jet extensions, and a 1-1 boost referenced regualtor

you can try rolling the lip on the bed with a baseball bat to flare it but that rough sometimes, my truck is lowered two inches but the larger wheels and tires added it right back, as far as the 285's, if you measure your backspacing right before you order then you shouldnt have a problem, but i agr...

first i strip the rear of all its guts, then i grind and cut off the spring pads, i then cut the axle tubes about 4 or 5 "s from the outer flange, i then weld the center section to the tubes using plenty off heat, then i chop the axle tubes to length and measure plenty of times cause i dont wan...

if you can weld, use and angle grinder and read a tape measure twice and have an angle finder your set,its no worse than putting a v8 in a ranger

i use parker pushlock hose for my feed and return, its nhra approved and easier to work with than steel

i chopped the rear in my basement using a few simple tools, and i made it that length just to fit those 315's inside the wheel well with out clearence issues

spray it!

ford 95 cobra r wheels, you need to grind the shock mount bolts where they come out of the back side of the nut as they will hit the sidewall at full lock, thats it.as far as the back you will have to go with a custom width rear to fit a 315 tire with out flaring the bed or hammering the wheel tub

howdy, ive got a race for ya

im runnin 275/40/17 up front and 315/35/17 in the rear with no body mods

i thought it was a real question and gave a real answer, its not the first time some asked me that exact question and probly wont be the last, im not gonna get in pissin match with ya cause it will do no good for anybody on here, if your gonna ask rhetorical questions then say so, so that unsolicite...

done it with an engine hoist and nylon straps, just extend the boom out the whole way