Trying to help some one going from a '96' 4R70 trans and Explorer ECU to his '89' B11. He'd like to retain the existing cable drive. I know a lot of places sell convertors to go the other way but can't find what he would need. Any ideas or ways around the problem?
Dave
Converting from VSS ddto cable spedo
Moderator: MalcolmV8
-
Dave
- Supporting Member
- Posts: 1524
- Joined: Fri Dec 10, 2004 4:36 pm
- SM: No
- Location: Central Wisconsin
Converting from VSS ddto cable spedo
'66'Ranchero 302/5 speed
2015 Stage 3 Roush - rated at 670 hp
2000 Ext Cab/4 door swap project
2000 Ext Cab/4 door, Summer beater
2000 Ext Cab/4 door, Winter beater
1969 Fairlane Cobra in Barn, just waiting
2015 Stage 3 Roush - rated at 670 hp
2000 Ext Cab/4 door swap project
2000 Ext Cab/4 door, Summer beater
2000 Ext Cab/4 door, Winter beater
1969 Fairlane Cobra in Barn, just waiting
Re: Converting from VSS ddto cable spedo
I believe you should be able to just bolt in the cable.
I did exactly the opposite when installing a Mustang T5- they use a cable, bolted in my stock VSS.
I did exactly the opposite when installing a Mustang T5- they use a cable, bolted in my stock VSS.
'97 Ranger Supercab.
Dropped 5/8
18X9,18X10 Bullitts 275/40 front and 295/35/18 rear
5.0 H.O. T5, 1.7rr, GT40 heads, GT40 intake, 65mm tb, 1 piece driveshaft, 3.55 Traction Lok, dual 2.5" Flowmasters, Cobra discs front and rear
Explorer power buckets and console
Dropped 5/8
18X9,18X10 Bullitts 275/40 front and 295/35/18 rear
5.0 H.O. T5, 1.7rr, GT40 heads, GT40 intake, 65mm tb, 1 piece driveshaft, 3.55 Traction Lok, dual 2.5" Flowmasters, Cobra discs front and rear
Explorer power buckets and console
Re: Converting from VSS ddto cable spedo
Re-read the build.
He can use the VSS from a Cruise Control equipped Fox body, or a '92-ish Ranger.
They had a VSS, with the wiring, and the cable bolted to that.
He can use the VSS from a Cruise Control equipped Fox body, or a '92-ish Ranger.
They had a VSS, with the wiring, and the cable bolted to that.
'97 Ranger Supercab.
Dropped 5/8
18X9,18X10 Bullitts 275/40 front and 295/35/18 rear
5.0 H.O. T5, 1.7rr, GT40 heads, GT40 intake, 65mm tb, 1 piece driveshaft, 3.55 Traction Lok, dual 2.5" Flowmasters, Cobra discs front and rear
Explorer power buckets and console
Dropped 5/8
18X9,18X10 Bullitts 275/40 front and 295/35/18 rear
5.0 H.O. T5, 1.7rr, GT40 heads, GT40 intake, 65mm tb, 1 piece driveshaft, 3.55 Traction Lok, dual 2.5" Flowmasters, Cobra discs front and rear
Explorer power buckets and console
-
Dave
- Supporting Member
- Posts: 1524
- Joined: Fri Dec 10, 2004 4:36 pm
- SM: No
- Location: Central Wisconsin
Re: Converting from VSS ddto cable spedo
Thanks Teddy, that sure makes it easier and cheaper. Never had to chance to play around with much of the 70-90 Ford stuff. Found this on Ebay that sounds like it would work.
http://www.ebay.com/itm/MOTORCRAFT-DY-5 ... #vi-ilComp
Dave
http://www.ebay.com/itm/MOTORCRAFT-DY-5 ... #vi-ilComp
Dave
'66'Ranchero 302/5 speed
2015 Stage 3 Roush - rated at 670 hp
2000 Ext Cab/4 door swap project
2000 Ext Cab/4 door, Summer beater
2000 Ext Cab/4 door, Winter beater
1969 Fairlane Cobra in Barn, just waiting
2015 Stage 3 Roush - rated at 670 hp
2000 Ext Cab/4 door swap project
2000 Ext Cab/4 door, Summer beater
2000 Ext Cab/4 door, Winter beater
1969 Fairlane Cobra in Barn, just waiting
Re: Converting from VSS ddto cable spedo
That looks like the part. Lets call it the combo VSS sensor!
'97 Ranger Supercab.
Dropped 5/8
18X9,18X10 Bullitts 275/40 front and 295/35/18 rear
5.0 H.O. T5, 1.7rr, GT40 heads, GT40 intake, 65mm tb, 1 piece driveshaft, 3.55 Traction Lok, dual 2.5" Flowmasters, Cobra discs front and rear
Explorer power buckets and console
Dropped 5/8
18X9,18X10 Bullitts 275/40 front and 295/35/18 rear
5.0 H.O. T5, 1.7rr, GT40 heads, GT40 intake, 65mm tb, 1 piece driveshaft, 3.55 Traction Lok, dual 2.5" Flowmasters, Cobra discs front and rear
Explorer power buckets and console
-
MalcolmV8
- Supporting Member
- Posts: 2597
- Joined: Fri Dec 10, 2004 4:50 pm
- SM: Yes
- Location: Kansas City, MO
Re: Converting from VSS ddto cable spedo
That combo looking VSS/cable part was stock on my 92 Ranger so they should be easy to get a hold of.
92 302 Ranger - sold
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8