My 93 Ranger 347 Stroker

All you can handle multimedia.

Moderator: MalcolmV8

User avatar
302project
Posts: 81
Joined: Mon Jul 30, 2007 6:42 pm
SM: No
Contact:

My 93 Ranger 347 Stroker

Post by 302project »

This is my 93 Ranger with a 347 stroker. Excuse my wiring mess
http://videos.streetfire.net/video/0b72 ... fb8399.htm
Ontariov8
Posts: 233
Joined: Wed Mar 09, 2005 11:13 pm
SM: No
Location: ontario canada
Contact:

Post by Ontariov8 »

truck sounds pretty sweet man post some still pics of the motor and give some more detail on whats done to it cam heads etc thanks man
94stranger
Posts: 357
Joined: Wed Jun 20, 2007 1:16 pm
SM: No
Location: Toronto, ON, Canada

Post by 94stranger »

nice truck! I can't wait till spring to get my truck finished!
'93 ranger ext cab 5.0L HO lorider
User avatar
302project
Posts: 81
Joined: Mon Jul 30, 2007 6:42 pm
SM: No
Contact:

Post by 302project »

Ontariov8 wrote:truck sounds pretty sweet man post some still pics of the motor and give some more detail on whats done to it cam heads etc thanks man
Well I don't have pics of the motor itself right now but this is close.
As for the motor....
347 stroker
crank - forged steel stroker
pistons - probe srs forged
rods - probe cnc 4340 I-beam forged
heads - trickflow
headers - long kooker super comp with ceramic coating
rockers - scorpion 1.6 ratio
push rods - trickflow chromemoly 6.750"
lifters - ford racing hyd. rollers
trickflow intake manifold and stud girdles
canton oil pan
ford racing polish valve cover
msd ignition complete set
march performance pulleys and alternator
75mm TB
Trickflow (Aeromotive) fuel rails
42lbs injectors
BBk cold air intake
Image
^^^That's me on the left with my dad
Image
Image
Image
Image
Ontariov8
Posts: 233
Joined: Wed Mar 09, 2005 11:13 pm
SM: No
Location: ontario canada
Contact:

Post by Ontariov8 »

looks pretty nice man hows the oil pan fit i'm looking at getting one like that for my 94 just wanna make sure i have the clearance before i buy one since i would like to have more oil for when doing the road course thanks man if you can get a pic of how much cleanerece you have that be great
Ontariov8
Posts: 233
Joined: Wed Mar 09, 2005 11:13 pm
SM: No
Location: ontario canada
Contact:

Post by Ontariov8 »

is you're truck lowered if so how much thanks
User avatar
302project
Posts: 81
Joined: Mon Jul 30, 2007 6:42 pm
SM: No
Contact:

Post by 302project »

^^^I don't have a pic right now but i have more than 1 inch clearance. Now i put like a half inch steel block on each side of the frame where the engine mounts go, i did that do to the fact that i'm using hooker's long headers and l&l product's solid engine mounts which their are not meant for each other, But I don't see a problem with clearance

I'll see if i can get a pic later for you but here are some pics of what i told ya.

Image
Image
User avatar
302project
Posts: 81
Joined: Mon Jul 30, 2007 6:42 pm
SM: No
Contact:

Post by 302project »

Ontariov8 wrote:is you're truck lowered if so how much thanks
I'm working on that right now lol.

My truck is going to be lowered 5 1/2" rear 5" front. Kit is from belltech and i guess that's all you can find(That's what I was told from the company that i bought my kit from) but i wanted like 8 or 9 inch drop on the rear and 6 or 7 inch on the front. But since i'm going for a 4-link suspension in a future...I bought what I could have now since I put a 2" body lift when I put the cab and bed together it looked like a 4x4 with a lift kit.
User avatar
v8ranger
Posts: 739
Joined: Thu Jan 24, 2008 9:16 am
SM: No
Location: Horseheads NY

Post by v8ranger »

Looks great!!!!! It should run down the road good with that stroker....
1986 Ranger with 1990 5.0 HO roller motor
Ported GT-40 heads
Duel plane air gap intake with 750cfm Holly
Paxton SN93 Supercharger with 3 1/2" pulley.
8 to 9psi of boost??
T-5 trans
Large tube shorty headers
Stock posi rear end
User avatar
302project
Posts: 81
Joined: Mon Jul 30, 2007 6:42 pm
SM: No
Contact:

Post by 302project »

^^^Thanks
cee21
Posts: 201
Joined: Mon Jan 29, 2007 11:17 am

Post by cee21 »

Looks and sounds great!!! You going to dyno it?
How long are those upper and lower radiator flex hoses?
User avatar
Dave
Supporting Member
Posts: 1524
Joined: Fri Dec 10, 2004 4:36 pm
SM: No
Location: Central Wisconsin

Post by Dave »

Yep, that sure looks nice! I always like to at least start out with a good looking, clean motor, a little sparkle helps.
Any problem getting that registed down there? Been a long, ugly discussion at RPS about if it's legal or not.
Dave
'66'Ranchero 302/5 speed
2015 Stage 3 Roush - rated at 670 hp
2000 Ext Cab/4 door swap project
2000 Ext Cab/4 door, Summer beater
2000 Ext Cab/4 door, Winter beater
1969 Fairlane Cobra in Barn, just waiting
User avatar
302project
Posts: 81
Joined: Mon Jul 30, 2007 6:42 pm
SM: No
Contact:

Post by 302project »

cee21 wrote:Looks and sounds great!!! You going to dyno it?
How long are those upper and lower radiator flex hoses?
Thanks!
Actually i didn't measure the hoses I bought 2 18 inch hoses kit but I think that with a 12 inch kit is good but i'm not sure that why i bought the 18 inch kit
Dave wrote:Yep, that sure looks nice! I always like to at least start out with a good looking, clean motor, a little sparkle helps.
Any problem getting that registed down there? Been a long, ugly discussion at RPS about if it's legal or not.
Dave
Thanks!!!
Not that i know of. I talked to my insure company and they say that they don't care about the motor swap or the paint, but when i paint it i have to update the registration due to the paint.
87ranger
Posts: 679
Joined: Thu May 11, 2006 1:57 pm
SM: No
Location: York PA.

Post by 87ranger »

looks good your upgrading the rear right, when your done post some times
twin turbo v8 menace
94stranger
Posts: 357
Joined: Wed Jun 20, 2007 1:16 pm
SM: No
Location: Toronto, ON, Canada

Post by 94stranger »

umm. . . . don't mean to be a pain (don't know if you know) but I noticed your front passenger side tire is on the wrong side! those are dirrectional tire that the "arrow" on the tread should point to the front which it doesn't and will result in youre truck "wondering"!
'93 ranger ext cab 5.0L HO lorider
Post Reply