My Ranger 5.0 Project UPDATED WITH COMPLETED PICS
Moderator: MalcolmV8
My Ranger 5.0 Project UPDATED WITH COMPLETED PICS
Here are a few pics of my project. Im pretty close to finishing it just lack a driveshaft and cover the heater box hole. I have lots of pics of everything so if you need any pics of anything or need more info just let me know. I have pretty much pics of everything. lol
Last edited by Foxracin on Sun Mar 23, 2008 9:12 am, edited 1 time in total.
1988 5.0 Ranger
- 302project
- Posts: 81
- Joined: Mon Jul 30, 2007 6:42 pm
- SM: No
- Contact:
-
- Posts: 357
- Joined: Wed Jun 20, 2007 1:16 pm
- SM: No
- Location: Toronto, ON, Canada
Well the exterior aint so hot right yet thats coming after all the drive train is done. But for the exterior Ive done got a set of clear corners for the front, ordered a roll pan which should be here sometime next week. Then i got to do all the body work and get all the dents and dings out and paint it. But here a pics of it with my 4wheeler in the back.
The interior is almost done I just need to get a new floor mat. I painted the dash, door panels and everything and it turned out half decent. I got a set of bucket seats out of a 05 cavalier for 40 bucks and they look good for the price. lol
The motor swap im using a pretty much stock 302. Its got a Weiand stealth intake, .500 lift cam, Holley 650 DP, MSD Ignition, the usual. Im using vet mounts and a explorer 4.0 radiator and explorer rear end with 3L73 gears. I got a set of tri-y headers made for the gt40p heads.
If you need pics of anything in particular let me know. I have a bunch of pics and a complete list of mods on my car domain thing. Here is a link to it.
http://www.cardomain.com/ride/2673513
The interior is almost done I just need to get a new floor mat. I painted the dash, door panels and everything and it turned out half decent. I got a set of bucket seats out of a 05 cavalier for 40 bucks and they look good for the price. lol
The motor swap im using a pretty much stock 302. Its got a Weiand stealth intake, .500 lift cam, Holley 650 DP, MSD Ignition, the usual. Im using vet mounts and a explorer 4.0 radiator and explorer rear end with 3L73 gears. I got a set of tri-y headers made for the gt40p heads.
If you need pics of anything in particular let me know. I have a bunch of pics and a complete list of mods on my car domain thing. Here is a link to it.
http://www.cardomain.com/ride/2673513
1988 5.0 Ranger
- Dave
- Supporting Member
- Posts: 1524
- Joined: Fri Dec 10, 2004 4:36 pm
- SM: No
- Location: Central Wisconsin
We all have works in progress one way or another. You can buy a new house and it's never done till the better half is happy.
Where did you get the tri-y's made for the "P" heads?
Dave
Where did you get the tri-y's made for the "P" heads?
Dave
'66'Ranchero 302/5 speed
2015 Stage 3 Roush - rated at 670 hp
2000 Ext Cab/4 door swap project
2000 Ext Cab/4 door, Summer beater
2000 Ext Cab/4 door, Winter beater
1969 Fairlane Cobra in Barn, just waiting
2015 Stage 3 Roush - rated at 670 hp
2000 Ext Cab/4 door swap project
2000 Ext Cab/4 door, Summer beater
2000 Ext Cab/4 door, Winter beater
1969 Fairlane Cobra in Barn, just waiting
- 302project
- Posts: 81
- Joined: Mon Jul 30, 2007 6:42 pm
- SM: No
- Contact:
Off a guy that made them for Central Coast Mustang but they went out of business. Me and another guy off rangerpowersports both got a set but there all gone now. He only had like 5 sets left.Dave wrote:We all have works in progress one way or another. You can buy a new house and it's never done till the better half is happy.
Where did you get the tri-y's made for the "P" heads?
Dave
1988 5.0 Ranger
- 302_Stranger
- Posts: 10
- Joined: Sat Nov 10, 2007 11:32 pm
- SM: No
- Location: NE Alabama
Here are some almost completed pics and even a couple pics of after the big burnout. lol
All I have left is new floor mat, cover the heater box and little stuff like there.
Explorer rear end. Its 3 inches wider but I like it.
Fidanza shifter.
Line lock button and the switches.
Under the hood.
Got Rubber?
All I have left is new floor mat, cover the heater box and little stuff like there.
Explorer rear end. Its 3 inches wider but I like it.
Fidanza shifter.
Line lock button and the switches.
Under the hood.
Got Rubber?
1988 5.0 Ranger