Replacement seats for Ranger
Moderator: MalcolmV8
- cgrey8
- Supporting Member
- Posts: 4055
- Joined: Fri Dec 10, 2004 8:23 pm
- SM: No
- Location: Acworth, Ga (Metro Atlanta)
- Contact:
Replacement seats for Ranger
This has been discussed here before. But I thought I'd ask it again. What are options available for replacing the stock Ranger seats? The only recollection I have of seats other people have tried are Honda seats. However I need fully functional seating for both driver and passenger side including working seat belts and slide-forward ability. I don't have a problem replacing the seat belts to work with some other brand. However that just doesn't sound easy. But have never done it, I thought I'd ask to see what others have done.
...Always Somethin'
89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller
Admin of EECtuning.org
89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller
Admin of EECtuning.org
Re: Replacement seats for Ranger
i used a 60/40 seat and belts out of a 04 in my 90 Ranger .... they fit good and look good too ....
96 Ranger Extended cab - work in progress.. 5.0 out of a 90 Mustang GT..Tremec TKO-3550-2 with mid-shift conversion ..Explorer GT40 intake and fuel rails. X303 FMS cam . WP Jr alum heads . K&N air filter.lowered .Weld Drag Lites (or Weld Pro-Stars) .. a 8.8 with Auburn Pro ..Moser custom alloy street axles (31 spline) and a 3:73 gear.L&L engine mounts and oil filter adapter.Aluminum Rad from James Duff.
Peace from Oxford Miss.
Grumpy
Peace from Oxford Miss.
Grumpy
- cgrey8
- Supporting Member
- Posts: 4055
- Joined: Fri Dec 10, 2004 8:23 pm
- SM: No
- Location: Acworth, Ga (Metro Atlanta)
- Contact:
Re: Replacement seats for Ranger
The seatbelt connections on the 04 is the same as the 90? Interesting. I'll keep that in mind since the chances of finding seats from my era Ranger in the junkyard are going to be any better than the ones I have. But an '04 Ranger could easily have good seats. They were a bolt-in solution?
...Always Somethin'
89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller
Admin of EECtuning.org
89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller
Admin of EECtuning.org
Re: Replacement seats for Ranger
we put a 60/40 seat out of a 94 Ranger in the boys 85. There some kind of modification we had to do but it wasn't nothing major. I would even have to look to remember what it was we did but it was in in less than and hour if remembering correctly. Seats work great and we really like it.
Dirt is for Farming....Asphalt is for Racing
85 Ranger 5.0, GTP Engine, Carbed, AOD, 7.5 3:45 rear gear(for now)
77 Mustang II 302, C4, 8" rearend 3:00 gears, 4 point roll bar
73 Mustang Convertible, Bone Stock, 48,000 original miles
91 F-250 5.8W(really needs a 460) 4X4
2000 Mustang 3.8 V6, Bone Stock
2011 Ford Fusion (Momma's hot rod)
85 Ranger 5.0, GTP Engine, Carbed, AOD, 7.5 3:45 rear gear(for now)
77 Mustang II 302, C4, 8" rearend 3:00 gears, 4 point roll bar
73 Mustang Convertible, Bone Stock, 48,000 original miles
91 F-250 5.8W(really needs a 460) 4X4
2000 Mustang 3.8 V6, Bone Stock
2011 Ford Fusion (Momma's hot rod)
- cgrey8
- Supporting Member
- Posts: 4055
- Joined: Fri Dec 10, 2004 8:23 pm
- SM: No
- Location: Acworth, Ga (Metro Atlanta)
- Contact:
Re: Replacement seats for Ranger
Nice. I'll start looking around in some yards to see what I can find. My seats are just getting old and worn. They aren't ripped and torn, but the fuzz that gives the upholstery its feel and color has almost completely worn off on the driver's side. It's down to the base-fabric and I'm sure its just a matter of time before that gets a tear or a rip that then starts showing the foam. So sometime in the next few months, I'd like to get some replacements of some sort.
What colors were available in the newer years? My truck interior is blue. My 97 has almost all tan interior even though the truck was painted green from the factory. Were there any blue interiors in the newer year Rangers?
What colors were available in the newer years? My truck interior is blue. My 97 has almost all tan interior even though the truck was painted green from the factory. Were there any blue interiors in the newer year Rangers?
...Always Somethin'
89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller
Admin of EECtuning.org
89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller
Admin of EECtuning.org
Re: Replacement seats for Ranger
Not sure what your calling newer but the 94 we got is blue.
Dirt is for Farming....Asphalt is for Racing
85 Ranger 5.0, GTP Engine, Carbed, AOD, 7.5 3:45 rear gear(for now)
77 Mustang II 302, C4, 8" rearend 3:00 gears, 4 point roll bar
73 Mustang Convertible, Bone Stock, 48,000 original miles
91 F-250 5.8W(really needs a 460) 4X4
2000 Mustang 3.8 V6, Bone Stock
2011 Ford Fusion (Momma's hot rod)
85 Ranger 5.0, GTP Engine, Carbed, AOD, 7.5 3:45 rear gear(for now)
77 Mustang II 302, C4, 8" rearend 3:00 gears, 4 point roll bar
73 Mustang Convertible, Bone Stock, 48,000 original miles
91 F-250 5.8W(really needs a 460) 4X4
2000 Mustang 3.8 V6, Bone Stock
2011 Ford Fusion (Momma's hot rod)
Re: Replacement seats for Ranger
Chris,
I had fox body Mustang buckets seats in mine several years ago and if I remember right the ranger seat tracks bolted right to the mustang seats. No mods.
I had fox body Mustang buckets seats in mine several years ago and if I remember right the ranger seat tracks bolted right to the mustang seats. No mods.
87 XCab Lowered
306 CI World windsor Heads
Tr-Y Headers, Flowmaster,Mild
650 Quik fuel Holley/Edelbrock rpm perf
T-5
306 CI World windsor Heads
Tr-Y Headers, Flowmaster,Mild
650 Quik fuel Holley/Edelbrock rpm perf
T-5
- jzwartster
- Posts: 85
- Joined: Mon Jan 31, 2011 1:53 pm
- SM: No
- Location: Paris Tennessee
Re: Replacement seats for Ranger
Jegs has some nice racing buckets!
Re: Replacement seats for Ranger
if you use seats out of a diff year Ranger ... make sure you get ALL the belts too ... even the over-the-shoulder one ... the one that goes back over the seat and into the cab pillar .... that is what i did ......
96 Ranger Extended cab - work in progress.. 5.0 out of a 90 Mustang GT..Tremec TKO-3550-2 with mid-shift conversion ..Explorer GT40 intake and fuel rails. X303 FMS cam . WP Jr alum heads . K&N air filter.lowered .Weld Drag Lites (or Weld Pro-Stars) .. a 8.8 with Auburn Pro ..Moser custom alloy street axles (31 spline) and a 3:73 gear.L&L engine mounts and oil filter adapter.Aluminum Rad from James Duff.
Peace from Oxford Miss.
Grumpy
Peace from Oxford Miss.
Grumpy
Re: Replacement seats for Ranger
I was able to find some very nice leather seats out of a 2k Explorer and they just bolted right in. The only issue that I have is the seat belt track was just a little short to reach the bolt hole. I am going to get seat tracks from a 2 door and see if the seat belt track will fit right.