How much hp will a stock 93 ranger transfer case take
I have exployer 5.0 what has tf 170 alum heads stage 2 cam
Transfer case hp max
Moderator: MalcolmV8
Transfer case hp max
93 4X4 Long Box w/ 98 exployer 5.0, aod eld performer 650 carb
72 ford 3/4 4X4 HiBoy big block
72 ford 3/4 4X4 HiBoy big block
- cgrey8
- Supporting Member
- Posts: 4055
- Joined: Fri Dec 10, 2004 8:23 pm
- SM: No
- Location: Acworth, Ga (Metro Atlanta)
- Contact:
Re: Transfer case hp max
I don't know of an exact number, but if I had to guess, I'd say a 350hp engine isn't an unreasonable load given the load will be split between front and rear. Now that's setup against a 350hp engine, not driving all 350hp to JUST the front axle. If you have the ass-end stuck in mud or hanging off a cliff and you are relying on just the front wheels to pull you out of a mess, I'd think you aren't going to be commanding MAX HP. You'll be using as little power as possible to hold onto whatever traction you do have.
...Always Somethin'
89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller
Admin of EECtuning.org
89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller
Admin of EECtuning.org