New V8-Ranger.com Store - Christmas stocking stuffers!!
Moderator: MalcolmV8
- MalcolmV8
- Supporting Member
- Posts: 2597
- Joined: Fri Dec 10, 2004 4:50 pm
- SM: Yes
- Location: Kansas City, MO
New V8-Ranger.com Store - Christmas stocking stuffers!!
Hey Guys,
Here's a great way to support the site. Rather than take donations I setup a store where you actually get something. They have t-shirts, mugs, hats, stickers, magnets, pins, calendars and all sorts of things. All v8-ranger of course.
I spent many hours just getting it to where it is and will continue to work on additional content. Hopefully this is something you guys enjoy.
This way you can help support the site to keep it going and have something to show for it.
Hope you guys enjoy.
http://www.cafepress.com/v8ranger
Malcolm
Here's a great way to support the site. Rather than take donations I setup a store where you actually get something. They have t-shirts, mugs, hats, stickers, magnets, pins, calendars and all sorts of things. All v8-ranger of course.
I spent many hours just getting it to where it is and will continue to work on additional content. Hopefully this is something you guys enjoy.
This way you can help support the site to keep it going and have something to show for it.
Hope you guys enjoy.
http://www.cafepress.com/v8ranger
Malcolm
Last edited by MalcolmV8 on Thu Nov 29, 2007 9:03 pm, edited 1 time in total.
92 302 Ranger - sold
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8
- MalcolmV8
- Supporting Member
- Posts: 2597
- Joined: Fri Dec 10, 2004 4:50 pm
- SM: Yes
- Location: Kansas City, MO
LOL that would be helpful now wouldn't it Man as silly as it was to forget the most important part, I had a good laugh.Foxracin wrote:Whats the store url
http://www.cafepress.com/v8ranger
Not yet. I'm still working on that one. I have to make all the background and surroundings transparent instead of white so you don't get a big white block around the picture.Foxracin wrote:and can you get a shirt in black.
Thanks
Malcolm - still working on it.
92 302 Ranger - sold
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8
- cgrey8
- Supporting Member
- Posts: 4055
- Joined: Fri Dec 10, 2004 8:23 pm
- SM: No
- Location: Acworth, Ga (Metro Atlanta)
- Contact:
Not that I don't like the Red Truck, but something a little more generic might be more appropriate or at least more picture options.
One thing I'd like to see is a decal to stick to my truck...something kind of like this that I threw together:
--pic removed--
Forgive the crudity of the image. The figure 8 looks a little odd, but that's the best I could come up with quickly.
One thing I'd like to see is a decal to stick to my truck...something kind of like this that I threw together:
--pic removed--
Forgive the crudity of the image. The figure 8 looks a little odd, but that's the best I could come up with quickly.
Last edited by cgrey8 on Wed Dec 10, 2008 12:20 pm, edited 1 time in total.
...Always Somethin'
89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller
Admin of EECtuning.org
89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller
Admin of EECtuning.org
- MalcolmV8
- Supporting Member
- Posts: 2597
- Joined: Fri Dec 10, 2004 4:50 pm
- SM: Yes
- Location: Kansas City, MO
Yes definitely. I appreciate the ideas, it lets me know which direction to head in.
92 302 Ranger - sold
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8
-
- Posts: 357
- Joined: Wed Jun 20, 2007 1:16 pm
- SM: No
- Location: Toronto, ON, Canada
Malcom. . . . . . this is an awsome idea!!!!!
I like the idea of the truck I also like cgrey's idea maybe you could also do a pic of your motor in the truck as well. I would definately get some of these items. and a black shirt would be awsome as well (especialy since I get white shirts dirty or stained the first time I wear it). >8)
I like the idea of the truck I also like cgrey's idea maybe you could also do a pic of your motor in the truck as well. I would definately get some of these items. and a black shirt would be awsome as well (especialy since I get white shirts dirty or stained the first time I wear it). >8)
'93 ranger ext cab 5.0L HO lorider
-
- Posts: 357
- Joined: Wed Jun 20, 2007 1:16 pm
- SM: No
- Location: Toronto, ON, Canada
- MalcolmV8
- Supporting Member
- Posts: 2597
- Joined: Fri Dec 10, 2004 4:50 pm
- SM: Yes
- Location: Kansas City, MO
The previews don't work as well for color but there are black shirts now available. Once you select the shirt it lets you choose a few other colors. Black and grey seem to be the best.
Thanks
Malcolm
Thanks
Malcolm
92 302 Ranger - sold
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8
- cgrey8
- Supporting Member
- Posts: 4055
- Joined: Fri Dec 10, 2004 8:23 pm
- SM: No
- Location: Acworth, Ga (Metro Atlanta)
- Contact:
What's the chance you can get a shirt or better yet a mug with just that V8-RaNGER.COM logo (or similar) on it? I'd love to have that big coffee mug for work in black with a V8 Ranger logo on it.
...Always Somethin'
89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller
Admin of EECtuning.org
89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller
Admin of EECtuning.org
- MalcolmV8
- Supporting Member
- Posts: 2597
- Joined: Fri Dec 10, 2004 4:50 pm
- SM: Yes
- Location: Kansas City, MO
I'm still working on a logo version. That will take a few more days. Glad to see you guys are enjoying it.
Malcolm
Malcolm
92 302 Ranger - sold
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8
- MalcolmV8
- Supporting Member
- Posts: 2597
- Joined: Fri Dec 10, 2004 4:50 pm
- SM: Yes
- Location: Kansas City, MO
Still working on more logos, here's something I got together tonight. I need to start a page with a collection of everything so we don't have a bunch of scattered links all over to follow.
http://www.cafepress.com/v8ranger1
http://www.cafepress.com/v8ranger1
92 302 Ranger - sold
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8
- cgrey8
- Supporting Member
- Posts: 4055
- Joined: Fri Dec 10, 2004 8:23 pm
- SM: No
- Location: Acworth, Ga (Metro Atlanta)
- Contact:
The logo is certainly more colorful than I came up with and the reflection is neat too. But the font itself is kind of generic and boring.
One of the things I liked about my logo is the familiar RaNGER emblem design. But I do have to admit that putting what I came up with together wasn't exactly easy. It'd take me, with my tools, considerably longer to add color to it and make it more interesting.
...Always Somethin'
89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller
Admin of EECtuning.org
89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller
Admin of EECtuning.org
-
- Posts: 665
- Joined: Fri Dec 10, 2004 5:43 pm
- SM: No
- Location: Spring Hill, FL (1 hour N of Tampa)
I like the first sticker and plan on putting them everywhere I can once they are available.
95 2wd shortbed styleside with a 98 mountaineer 5.0
ported GT-40P heads, E-303 cam, Trick Flow Street Heat intake, 1.7 rollers, 24lb injs,155lph in-tank pump, built AOD, 2800 converter, Torque Monster headers, dropped 3/4 on 98 Cobra wheels. Eternal work in progress.
94 Ranger XLT b. 6/10/94 d.3/28/11 300,842 miles RIP
06 Fusion SEL
11 F150 FX2 SCrew 5.0 Coyote, Custom SCT X3 tune, Roush CAI
ported GT-40P heads, E-303 cam, Trick Flow Street Heat intake, 1.7 rollers, 24lb injs,155lph in-tank pump, built AOD, 2800 converter, Torque Monster headers, dropped 3/4 on 98 Cobra wheels. Eternal work in progress.
94 Ranger XLT b. 6/10/94 d.3/28/11 300,842 miles RIP
06 Fusion SEL
11 F150 FX2 SCrew 5.0 Coyote, Custom SCT X3 tune, Roush CAI
- MalcolmV8
- Supporting Member
- Posts: 2597
- Joined: Fri Dec 10, 2004 4:50 pm
- SM: Yes
- Location: Kansas City, MO
Yes RaNger style like the badge on the side is coming. That one takes a lot more work to create.
92 302 Ranger - sold
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8