line lock

All discussions about V8 Rangers

Moderator: MalcolmV8

Post Reply
User avatar
lefty
Posts: 45
Joined: Tue Sep 05, 2006 7:31 pm
SM: No
Location: central florida

line lock

Post by lefty »

can the line lock solenoid be between the master cylinder and the proportioning valve on the 84 ranger system ?
1984 longbed
30 over 302
edelbrock aluiminum preformer heads
e303 cam
1.6 rockers
600 cfm edelbrock / performer RPM intake
headman headers w/2.5 " duel in duel out magnaflow muffler.
8.8 diff; 3;73 LS
c5 w/b&m trick shift / 2800 stall speed converter
User avatar
Warpig Racing
Posts: 488
Joined: Sun Nov 20, 2005 2:34 pm
SM: No
Contact:

Post by Warpig Racing »

I am certain that my 88 does not have a proportion valve on it. Seems like the front line goes from the master cyclinder to the line lok to a splitter then to the left and right wheels.
Will
88 extended cab w/ 347, C6 w/ 3100 stall, Narrow 9" w/ 28x14.50 Quick Time Pros.
http://s118.photobucket.com/albums/o117/imabass/Ranger
09 Honda chopper http://s118.photobucket.com/albums/o117/imabass/CB750/
99 Ram
05 Toyota Camry (4 banger)
User avatar
Foxracin
Posts: 88
Joined: Sat Oct 13, 2007 6:45 pm
SM: No
Location: Mount Holly, NC

Post by Foxracin »

Warpig Racing wrote:I am certain that my 88 does not have a proportion valve on it. Seems like the front line goes from the master cyclinder to the line lok to a splitter then to the left and right wheels.
Yea, mine is also like that on my 88. I also plan on getting a line lock for mine also.
1988 5.0 Ranger
87ranger
Posts: 679
Joined: Thu May 11, 2006 1:57 pm
SM: No
Location: York PA.

Post by 87ranger »

yea, mine didnt have a prop valve either, just put it between the master and the front spliter
twin turbo v8 menace
User avatar
Warpig Racing
Posts: 488
Joined: Sun Nov 20, 2005 2:34 pm
SM: No
Contact:

Post by Warpig Racing »

Here's a pic that I found. The line lok is fastened to the bottom side of the master cyclinder using large hose clamps.

Image
Will
88 extended cab w/ 347, C6 w/ 3100 stall, Narrow 9" w/ 28x14.50 Quick Time Pros.
http://s118.photobucket.com/albums/o117/imabass/Ranger
09 Honda chopper http://s118.photobucket.com/albums/o117/imabass/CB750/
99 Ram
05 Toyota Camry (4 banger)
User avatar
lefty
Posts: 45
Joined: Tue Sep 05, 2006 7:31 pm
SM: No
Location: central florida

Post by lefty »

thanks gang thats what I was looking for .
1984 longbed
30 over 302
edelbrock aluiminum preformer heads
e303 cam
1.6 rockers
600 cfm edelbrock / performer RPM intake
headman headers w/2.5 " duel in duel out magnaflow muffler.
8.8 diff; 3;73 LS
c5 w/b&m trick shift / 2800 stall speed converter
User avatar
Warpig Racing
Posts: 488
Joined: Sun Nov 20, 2005 2:34 pm
SM: No
Contact:

Post by Warpig Racing »

No prob.

On a side note but not completly unrelated.... it's been a several months since I have driven my truck. It was down for a while getting the tranny rebuilt, then cold weather happened.

today i got the tranny in and hooked up so i drove it around the block. Then i tested out the line loc in front of my house :D . Lets just say that it made a little noise and the neighbors did not appreciate it like i did and they called the cops :evil: . Cops show up and I just knew i was in for a ticket as the truck was still parked on the street and it has two big piles of burnt rubber behind the tires :D .

Cops " You been out here doing power stalls"
Me "I would love to lie to you and say that I didn't but its pretty obvious that I did"
Cops " Well there are your tires and they look expensive so I would suggest that you not do that anymore"

they really didnt care at all. Then we went out to the truck and I showed them all the modifications to the truck and they were impressed. Great thing about living in Oklahoma is that there is no safty inspections anymore and anything goes unless the cop want to be a prick. luckly these cops were cool.
Will
88 extended cab w/ 347, C6 w/ 3100 stall, Narrow 9" w/ 28x14.50 Quick Time Pros.
http://s118.photobucket.com/albums/o117/imabass/Ranger
09 Honda chopper http://s118.photobucket.com/albums/o117/imabass/CB750/
99 Ram
05 Toyota Camry (4 banger)
User avatar
lefty
Posts: 45
Joined: Tue Sep 05, 2006 7:31 pm
SM: No
Location: central florida

Post by lefty »

Got my line lock hooked up gave it a quick try ! that was fun . I don't realy plan on using it much but you never know . although my ranger has been turn key for about 5 yrs now I went ahead and took this time to replace some brake lines ( of course we all know you are never finished with the project ) . Warpig glad to hear that you didn't catch to much static . I guess I am luck usually when I pull the ranger out of the garage my neighbors motion for me to smoke em




[/b]
1984 longbed
30 over 302
edelbrock aluiminum preformer heads
e303 cam
1.6 rockers
600 cfm edelbrock / performer RPM intake
headman headers w/2.5 " duel in duel out magnaflow muffler.
8.8 diff; 3;73 LS
c5 w/b&m trick shift / 2800 stall speed converter
Post Reply