Who here go's to the track
Moderator: MalcolmV8
-
- Posts: 52
- Joined: Tue Dec 30, 2008 11:30 pm
- SM: No
- Location: Owen Sound, Ontario
Who here go's to the track
As the title says ,anyone go to test n tune nights.?....how fast are you realy running. No dreamers im looking for real times....Il go first ...Grand bend motorplex ...real slow 16.2 ish @89 in the 1/4...sucks but thats why in upgradeing.
87 Ranger short box.17 inch gts...302..FMS E cam ,600 edelbrock,mazda 5 speed.....RIP tony B.....
- Warpig Racing
- Posts: 488
- Joined: Sun Nov 20, 2005 2:34 pm
- SM: No
- Contact:
I took it out a couple of times before i got the tranny rebuilt. I was having a 3rd gear issue. Issue was i couldnt get it into 3rd gear. So i was bouncing it off the rev limiter long before the 1/4.
13.1 @ 103MPH. Now that I have a third gear, I need to get it out to the track. I have also installed a 150 shot but yet to test it out. So if the tranny is all good now and the 150 gets tuned up I am hoping for a much improved time.
13.1 @ 103MPH. Now that I have a third gear, I need to get it out to the track. I have also installed a 150 shot but yet to test it out. So if the tranny is all good now and the 150 gets tuned up I am hoping for a much improved time.
Will
88 extended cab w/ 347, C6 w/ 3100 stall, Narrow 9" w/ 28x14.50 Quick Time Pros.
http://s118.photobucket.com/albums/o117/imabass/Ranger
09 Honda chopper http://s118.photobucket.com/albums/o117/imabass/CB750/
99 Ram
05 Toyota Camry (4 banger)
88 extended cab w/ 347, C6 w/ 3100 stall, Narrow 9" w/ 28x14.50 Quick Time Pros.
http://s118.photobucket.com/albums/o117/imabass/Ranger
09 Honda chopper http://s118.photobucket.com/albums/o117/imabass/CB750/
99 Ram
05 Toyota Camry (4 banger)
-
- Posts: 52
- Joined: Tue Dec 30, 2008 11:30 pm
- SM: No
- Location: Owen Sound, Ontario
yup for sure i realy like it at the Bend. only thing it is 225kms one way so i only go once a year and its hard to dodge the rain.....haha the night i went i had the slowest thing there ,But i always have a great time lots of hondas to stomp.
87 Ranger short box.17 inch gts...302..FMS E cam ,600 edelbrock,mazda 5 speed.....RIP tony B.....
- MalcolmV8
- Supporting Member
- Posts: 2597
- Joined: Fri Dec 10, 2004 4:50 pm
- SM: Yes
- Location: Kansas City, MO
You must have good traction. I ran 12.2 on street tires in my Cobra but it was at 126 mph.
92 302 Ranger - sold
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8
Re: Who here go's to the track
LMAO. I had to laugh at that. 12.2 at 126... what was your 60ft? must've been cooking those things huh?
100% ADRENALINE JUNKIE
90 2-lo ranger x-cab xlt.. 347 swap coming soon... and paint... and airbags... etc.
92 F150 I-6 8" lift with 35's
90 Mustang LX: in the chop shop... soon to be a new color with new motivation: Dart 363 with forced induction... 750ish+ rwhp. gotta keep with the times...
87 Mustang... DSS super pro bullet 306, Crower rods, Max quench pistons,Comp cam, stage III ported Holley/Brodix heads, TKO600, Vortech'd, pullied, etc.... 572rwhp... though it's day's are numbered....
90 2-lo ranger x-cab xlt.. 347 swap coming soon... and paint... and airbags... etc.
92 F150 I-6 8" lift with 35's
90 Mustang LX: in the chop shop... soon to be a new color with new motivation: Dart 363 with forced induction... 750ish+ rwhp. gotta keep with the times...
87 Mustang... DSS super pro bullet 306, Crower rods, Max quench pistons,Comp cam, stage III ported Holley/Brodix heads, TKO600, Vortech'd, pullied, etc.... 572rwhp... though it's day's are numbered....
- MalcolmV8
- Supporting Member
- Posts: 2597
- Joined: Fri Dec 10, 2004 4:50 pm
- SM: Yes
- Location: Kansas City, MO
Re: Who here go's to the track
I'll have to dig up the slip but yeah it was horrible. I spun all through first and most of second and wheel hop was really bad. So bad I ended up snapping the driver's side half shaft after visiting the track a few times. I guess the wheel hop just weak'nd the heck out of it and one day I made a pass and right as I shifted to second it just snapped and made a really loud bang sound inside the car.
92 302 Ranger - sold
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8
Re: Who here go's to the track
Be happy it was just a halfshaft. not so fortunate for some of the earlier mustang guys without c-clip eliminators... they lose their whole wheel with the axle... haha...
When's the next attempt? and hopefully with some DR's this time?
When's the next attempt? and hopefully with some DR's this time?
100% ADRENALINE JUNKIE
90 2-lo ranger x-cab xlt.. 347 swap coming soon... and paint... and airbags... etc.
92 F150 I-6 8" lift with 35's
90 Mustang LX: in the chop shop... soon to be a new color with new motivation: Dart 363 with forced induction... 750ish+ rwhp. gotta keep with the times...
87 Mustang... DSS super pro bullet 306, Crower rods, Max quench pistons,Comp cam, stage III ported Holley/Brodix heads, TKO600, Vortech'd, pullied, etc.... 572rwhp... though it's day's are numbered....
90 2-lo ranger x-cab xlt.. 347 swap coming soon... and paint... and airbags... etc.
92 F150 I-6 8" lift with 35's
90 Mustang LX: in the chop shop... soon to be a new color with new motivation: Dart 363 with forced induction... 750ish+ rwhp. gotta keep with the times...
87 Mustang... DSS super pro bullet 306, Crower rods, Max quench pistons,Comp cam, stage III ported Holley/Brodix heads, TKO600, Vortech'd, pullied, etc.... 572rwhp... though it's day's are numbered....
- MalcolmV8
- Supporting Member
- Posts: 2597
- Joined: Fri Dec 10, 2004 4:50 pm
- SM: Yes
- Location: Kansas City, MO
Re: Who here go's to the track
For now I just want to get the motor fixed and running again and yes some drag radials are definitely needed.
92 302 Ranger - sold
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8