Some updated pics of my 86
Moderator: MalcolmV8
Some updated pics of my 86
this pic is from last year....
I am hoping to pull the motor this winter and do some cleaning up under the hood.
1986 Ranger with 1990 5.0 HO roller motor
Ported GT-40 heads
Duel plane air gap intake with 750cfm Holly
Paxton SN93 Supercharger with 3 1/2" pulley.
8 to 9psi of boost??
T-5 trans
Large tube shorty headers
Stock posi rear end
Ported GT-40 heads
Duel plane air gap intake with 750cfm Holly
Paxton SN93 Supercharger with 3 1/2" pulley.
8 to 9psi of boost??
T-5 trans
Large tube shorty headers
Stock posi rear end
Re: Some updated pics of my 86
Whats the tube/cable going into the top of the Carb Hat?
87 Ranger: Coast High Performance 331 kit 28oz balance, Comp XE264HR14 cam, 64cc 185 AFR heads, 1.7 roller rockers, Full manual reverse VB c4
- cgrey8
- Supporting Member
- Posts: 4055
- Joined: Fri Dec 10, 2004 8:23 pm
- SM: No
- Location: Acworth, Ga (Metro Atlanta)
- Contact:
Re: Some updated pics of my 86
A tap to measure boost pressure on a pressure gauge?????? I don't know why that couldn't be tapped down on the manifold below the butterflies too.
...Always Somethin'
89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller
Admin of EECtuning.org
89 Ranger Supercab, 331, ported GT40p heads w/1.6RRs, Crane Powermax 2020 cam, ported Explorer lower, FMS Explorer (GT40p) headers, aftermarket T5 'Z-Spec', 8.8" rear w/3.27s, Powertrax Locker, A9L w/Moates QuarterHorse, Innovate LC-1, James Duff traction bars, iDelta DC Fan controller
Admin of EECtuning.org
Re: Some updated pics of my 86
Yes, its for the boost gauge. The hole was all read there, so that's where I put it. I got the whole supercharger set up from a guy that had it on an old Mustang. He was going back to original. Must be that's how he had it set up. I just utilized what was all ready there. Like I said, I'm hoping to pull the motor this winter and do some detail work on the engine bay and engine. It looks kind of ratty now. The motor has been in there for 7 years. And through changing this and changing that, its become unorganized....
1986 Ranger with 1990 5.0 HO roller motor
Ported GT-40 heads
Duel plane air gap intake with 750cfm Holly
Paxton SN93 Supercharger with 3 1/2" pulley.
8 to 9psi of boost??
T-5 trans
Large tube shorty headers
Stock posi rear end
Ported GT-40 heads
Duel plane air gap intake with 750cfm Holly
Paxton SN93 Supercharger with 3 1/2" pulley.
8 to 9psi of boost??
T-5 trans
Large tube shorty headers
Stock posi rear end
- Dave
- Supporting Member
- Posts: 1524
- Joined: Fri Dec 10, 2004 4:36 pm
- SM: No
- Location: Central Wisconsin
Re: Some updated pics of my 86
Looks good but a little clean-up never hurts! Doing that to my house right now.
Any deer yet, how's the back doing?
Dave
Any deer yet, how's the back doing?
Dave
'66'Ranchero 302/5 speed
2015 Stage 3 Roush - rated at 670 hp
2000 Ext Cab/4 door swap project
2000 Ext Cab/4 door, Summer beater
2000 Ext Cab/4 door, Winter beater
1969 Fairlane Cobra in Barn, just waiting
2015 Stage 3 Roush - rated at 670 hp
2000 Ext Cab/4 door swap project
2000 Ext Cab/4 door, Summer beater
2000 Ext Cab/4 door, Winter beater
1969 Fairlane Cobra in Barn, just waiting
Re: Some updated pics of my 86
Got a doe with my bow on the 18th. Missed a 6 point the next day. Haven't seen a deer since...lol.....The weather has been pretty crazy. Windy, warm, rainy, full moon, everything that would keep a deer from moving has happened in the past week.Dave wrote:Looks good but a little clean-up never hurts! Doing that to my house right now.
Any deer yet, how's the back doing?
Dave
My back is doing ok. I had the pain pump put in about 4 weeks ago. Now they just have to fine tune it. They had to change the meds in it to something else, now its just finding the right setting. They only turn it up a little at a time. Then it takes a few days to see if that setting will work. Its better, but still could be better. Now I look like I have a growth in my abdomen. The pump is about the size of a hockey puck....
1986 Ranger with 1990 5.0 HO roller motor
Ported GT-40 heads
Duel plane air gap intake with 750cfm Holly
Paxton SN93 Supercharger with 3 1/2" pulley.
8 to 9psi of boost??
T-5 trans
Large tube shorty headers
Stock posi rear end
Ported GT-40 heads
Duel plane air gap intake with 750cfm Holly
Paxton SN93 Supercharger with 3 1/2" pulley.
8 to 9psi of boost??
T-5 trans
Large tube shorty headers
Stock posi rear end
Re: Some updated pics of my 86
I Did get this nice buck during gun season this year... He is a brute.. Its the biggest buck I have ever shot, or seen in the woods around here. Im getting it mounted..Dave wrote:Looks good but a little clean-up never hurts! Doing that to my house right now.
Any deer yet, how's the back doing?
Dave
1986 Ranger with 1990 5.0 HO roller motor
Ported GT-40 heads
Duel plane air gap intake with 750cfm Holly
Paxton SN93 Supercharger with 3 1/2" pulley.
8 to 9psi of boost??
T-5 trans
Large tube shorty headers
Stock posi rear end
Ported GT-40 heads
Duel plane air gap intake with 750cfm Holly
Paxton SN93 Supercharger with 3 1/2" pulley.
8 to 9psi of boost??
T-5 trans
Large tube shorty headers
Stock posi rear end
- carvinmark
- Posts: 235
- Joined: Sun Oct 24, 2010 4:54 am
- SM: No
- Location: Frederic, Michigan
Re: Some updated pics of my 86
Nice buck!
88 Ranger short bed, 5.0 HO, T5, 9", My driver, Thanks guys for your help
63 Falcon, chopped top, tubbed, many mods, sitting for many years, soon to have 331 and T5
60 Galaxie Starliner, chopped rat rod cruiser
Berrian 100" rail, Corvair 140+ 6 cylinder
00 Explorer, 4.0, AWD, daily driver
63 Falcon, chopped top, tubbed, many mods, sitting for many years, soon to have 331 and T5
60 Galaxie Starliner, chopped rat rod cruiser
Berrian 100" rail, Corvair 140+ 6 cylinder
00 Explorer, 4.0, AWD, daily driver
-
- Posts: 202
- Joined: Sun Sep 17, 2006 10:44 am
- SM: No
- Location: ocala fla
Re: Some updated pics of my 86
heey.. good job, buddy. i'd have that mounted too...the old trucker
83 ranger,347 stroker,sportsman block,forged crank,h rods,forged pistons,10.2 comp,roush heads,750 quick fuel carb,gear driven comp solid roller 306 dur.with 612 lift, motorsport roller rockers,6al msd,jegs rad,elec fan,c-4 full manual reverse pattern with trans brake 3800 stall,hurst quarter stick,hooker headers. fiberglass frontend,narrowed rear frame,tubbed,4 link rear,9 inch narrowed rear,4:56 locker,10 piont cage,10 gal fuel cell,180hp nos,linelock,m/t 18.5 wide rear tire.671 at 9lb boost
- jzwartster
- Posts: 85
- Joined: Mon Jan 31, 2011 1:53 pm
- SM: No
- Location: Paris Tennessee
Re: Some updated pics of my 86
Your truck looks real clean and slick nice blue too.
- Dave
- Supporting Member
- Posts: 1524
- Joined: Fri Dec 10, 2004 4:36 pm
- SM: No
- Location: Central Wisconsin
Re: Some updated pics of my 86
Yep, still looks nice! Just got of the phone talking with the Grumpy one and your truck came up. Said he's doiing the same as most of us, staying in and staying warm.
DAve
DAve
'66'Ranchero 302/5 speed
2015 Stage 3 Roush - rated at 670 hp
2000 Ext Cab/4 door swap project
2000 Ext Cab/4 door, Summer beater
2000 Ext Cab/4 door, Winter beater
1969 Fairlane Cobra in Barn, just waiting
2015 Stage 3 Roush - rated at 670 hp
2000 Ext Cab/4 door swap project
2000 Ext Cab/4 door, Summer beater
2000 Ext Cab/4 door, Winter beater
1969 Fairlane Cobra in Barn, just waiting
- jzwartster
- Posts: 85
- Joined: Mon Jan 31, 2011 1:53 pm
- SM: No
- Location: Paris Tennessee
Re: Some updated pics of my 86
Yes its cold this mornin was 60 yesterday than got hit hard with a cold front 25 now. Havent seen grumpy's truck yet,maybe later. tryin to find a fiberglass cowl hood, no luck. or even a flippen stick on if I have to.
- MalcolmV8
- Supporting Member
- Posts: 2597
- Joined: Fri Dec 10, 2004 4:50 pm
- SM: Yes
- Location: Kansas City, MO
Re: Some updated pics of my 86
-12 here this morning. I took some boiling water and threw it out on the snow not much else to do with this cold.jzwartster wrote:Yes its cold this mornin was 60 yesterday than got hit hard with a cold front 25 now.
92 302 Ranger - sold
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8
94 302 Ranger AWD - sold
07 BMW 335xi - tuned, boost turned up, E85 - sold
04 911 TT - to many mods to list. Over 600 All Wheel HP on pump gas - sold
2015 Coyote - daily driver
03 Cobra - 2.3 TVS on a built 12:1 CR motor with ported heads, cams, long tubes etc.
MD Racing Lean Protection Module
E85
Tuned by MD Racing
https://www.youtube.com/c/MalcolmV8