SBF speed parts

[BigRigTech]

750 Holley Dual feed vacuum secondary carb. Choke horn milled off and it has a brand new AED carb kit installed. Like new condition ready to bolt on with a chrome fuel line as well. $250obo or trade for a 750 double pumper in equally good condition. SOLD

Ford 8.8 stock 28 spline posi from a 94 GT, good USED condition. $90obo SOLD

Comp Cams 351W 280H Magnum cam.
Installed in engine but never run.
.512/.512 lift, 280 duration
new condition. $100obo

Trick-flow STG-1 roller cam for a SBF, used but in excellent condition. 221°/225° .312/.319 .499/.510 112°
$150obo

Manley Pro series pushrods for a 302/5.0
.050" longer than stock. Used 6 months.
$70obo

Crane Cams roller valve springs new in box.
Suited for a B303 roller cam or similar. Max valve lift .544". Must use aftermarket retainers. The part number is 99841-16.
$100obo

Near mint radiator, was removed from a mid 80's V6 powered fox chassis based small LTD. Excellent condition, was recored in 2002 and used very little since. $50obo.

Two carb'd Duraspark-II distributors for a flat tappet cam. Good shape,
$25 each.

I have Three C5 bellhousings with 3.8L V6 torque converters. $50 each for a BH and converter as a set. Will fit case fill C4's as well.

Willing to trade/deal for the following:

3000+rpm C4 converter-26 spline, rims/slicks Ford 4.5" BP, 1.6 SBF ]pedestal mount roller rocker arms, 31 spline 8.8 posi or spool, ladder bars useable on a 93 ranger, adjustable rear coil-over shocks, C4 trans-brake, large turbo wastegate, 750 Double Pumper carb. Email me.

I have 100% perfect feedback (109 and counting) on ebay as a buyer and a seller. EVERYTHING NEEDS TO GO SO I'M OPEN TO OFFERS!!! I NEED THE MONEY FOR MY RANGER PROJECT

[ecp48]

Do you still have the valve springs?

what would shipping be to Athens , Ga, USA 30606?

thanks,

Ed

[BigRigTech]

Yup, I still have them. Regular ground mail - 9-10 business days would be about $16cdn. Xpresspost (6 days) would be about $25cdn.