Posted by cjcnomor4 from rrcs-24-129-134-82.se.biz.rr.com (24.129.134.82) on Wednesday, November 24, 2004 at 5:27PM :
In Reply to: Ladder bars vs. Leaf mount Traction Bars posted by cgrey8 from vpn.automatedlogic.com (68.208.14.2) on Wednesday, November 24, 2004 at 3:59PM :
Unregistered Poster
if you get a flip kit you can mount the springs under the axle, but you'll also lower the truck 3-4 inches in the rear. james duff (i think) makes a traction bar kit that mounts on top of the leaf springs, using the u-bolts, then runs to the frame near the front mount for the leaf spring. mine is already flipped and lowered so i dont have ground clearance for the slapper type ladder bar so i'm gonna try the duff kit. i have to make a mounting plate since my ubolts mount upside down.
|
-- cjcnomor4 -- signature BmmEN.
Follow Ups:
|